Complete pack of control lines for outhaul, cunningham and vang. Comes
with 4 mm polyester secondary lines and Dyneema® primary lines. Outhaul
shockcord included.
Heavily padded foil bag. Separate compartments for rudder, daggerboard,
tiller and a large compartment for accessories. With carrying handle and
adjustable and detachable strap.Good for Laser®/ILCA® foils.
The SD top cover is made of
strong and flexible solution dyed PVC coated polyester. The cover is slightly
tented so that spars can be stored inside the boat and have wide skirts
around the edge of the hull to provide good protection.
SD bottom
cover is made of 600D PU coated polyester. The bottom cover webbing loops are installed to be able to pull the cover
tight around the hull during transport.
The SD top cover is made of strong and flexible solution dyed PVC coated polyester.
The cover is slightly tented so that spars can be stored inside the boat and have wide skirts around the edge of the hull to provide good protection.
Wide 10 cm padded hiking straps, 86 cm long with a loop on the aft and
open on the front. The pro version is extra stiff with hard foam inside and
rubber grip underneath.
23,5cm high sailnumbers/letters. Good for ILCA 5 and 7. Available in: black/red/blue colors. At order please specify the number, letter. Example: black HUN 555; this means 12pieces of sailnumbers, so you need to put 12 items in the basket.
In this case, I will deliver for you: 2 pieces H, 2 pieces U, 2 pieces N, 6 pieces number 5.
30,5cm high sailnumbes / letters. Good for ILCA 5 and 7.
Available in: black/red/blue colors.At order please specify the number, letter. Example: black HUN 555; this means 12pieces of sailnumbers, so you need to put 12 items in the basket. In this case, I will deliver for you: 2 pieces H, 2 pieces U, 2 pieces N, 6 pieces number 5.
Compatible training sail for: - Laser® 4.7 / ILCA® 4- Laser® Radial / ILCA® 6- Laser® Standard / ILCA® 7Not allowed for use in official Class Association events.
The bow locks into a horseshoe shaped padded support and the hull rests
on 2 side supports which lock under the gunwale. This provides a stable support
for the Laser® / ILCA®. It comes with a firm rubber V-support (EX2017)
which protects and stabilizes the hull when launching. With 2-piece middle
section and spring lock quick release system which allows you to disassemble
the trolley in matter of seconds for storage and travel.
The Windesign wind indicator has a strong vane arm which is accurately balanced and performs amazing sensitive. The vane arm is attached to the needle with a positive locking system which prevents losing the vane arm.It can be fixed easily on masts with diam 45-65mm. (Finn, Laser/ILCA, Pirat etc.)
The Windesign wind indicator has a strong vane arm which is accurately
balanced and performs amazing sensitive. The vane arm is attached to the
needle with a positive locking system which prevents losing the vane arm.It can be fixed easily on masts with diam 45-65mm. (Finn, Laser/ILCA, Pirat etc.)
€22.70*
This website uses cookies to ensure the best experience possible. More information...