A 6 mm shockcord with a red PVC handle to retain the daggerboard in its
case. The handle keeps your daggerboard in place and your hiking straps
up too. Comes in a complete set to keep the shockcord in place.
Top cover made of strong and flexible solution dyed PVC coated
polyester. 100% waterresistant but not breathable. Wide skirts around the
edge of the hull for good protection. Fast and easy to install with two adjustable
straps. Solution dyed polyester has much better color fastness and UV
resistance than cheaper pigment dyed polyester.
Plain bearing halyard as used on Optiparts silver masts.Set contains:- Plain bearing hook-in block- 16 mm Harken ball bearing micro block- top part of the halyard
Stainless steel lock to secure your mast from coming out of its step when
the boat is capsized. Prevents costly foredeck damage. This lock has
a rubber insert and should be clamped around the mast just under the deck.We suggest to use the collar in addition to the rope locking system to create
double security. Supplied with a line to attach it to the maststep.
Lightweight aluminium trolley with stainless steel axles and solid hull supports.
Supplied with Bow wow which is made of recycled environmental
friendly plastic, a unique system to lock the bow to the trolley with one quick
and simple movement. Prevents the hull from sliding off on steep launch
ramps. The trolley has been designed to be the most functional available.
Spring locking quick release of all parts allow the trolley to be disassembled
in a matter of seconds for storage and travel. The frame has welded joints
and is anodized to prevent corrosion. The Optiparts trolley is supplied with
8 mm stainless steel push button wheel locks which are mounted inside the
axle.
This padded strap is made of strong
polyester webbing, covered with wear resistant cloth, filled with foam plate
material which does not absorb water. Strong stitched through construction.
Aft end a pressed ring and sewn flat to prevent twisting.Also: - loops for shockcord to pull up the front for easy access
- and front ends are open for mounting with plate or rope.
The Optiparts maststep has an oval cup, which allows the mast to tilt forward
when going downwind. Friction between mast and maststep is reduced
to a minimum. Different mast rakes can easily be repeated using the scale
on the base. Separately a mast step spring lock can be purchased aswell.
The stainless steel spring prevents the nut from turning accidentally.
The school spars are made of high quality aluminium tube, fitted with a
stainless steel halyard block, halyard cleat and downhaul cleat, a nylon pin
stop and two stainless steel eyes for fixing the head of the sail. The sprit has
no chafe protection tube. The set is not allowed for racing!The set contains:- school mast- school boom - 32mm- school sprit - 25mm
These sleeve pocket sail is ideal for sailing schools. The mast slides in
a sleeve pocket while the sail is loose footed on the boom. Made of strong
3.8 oz sailcloth.They have five panels without sailbattens, 4 heavily
reinforced corners and webbing loops for the boom. This sail should be used with sleeve school set OW1052.
The upgraded school spars are made of high quality aluminium tube and
fitted with a stainless steel halyard block, aluminium Clamcleats, a nylon pin
stop and two stainless steel eyes for fixing the head of the sail. The upgraded
sprit has 15 cm anti chafe protection tubing.The set is not allowed for racing! The set contains:
- upgraded school mast
- upgraded school boom - 32mm
- upgraded school sprit - 25mm