Give your Optimist some color with the colored X-gripped tiller extensions. A range of 20 mm aluminium tiller extensions, fitted with X-gripped heat shrinkable tubing and a releasable rubber joint with rope core.
Give your Optimist some color with the colored X-gripped tiller extensions.
A range of 20 mm aluminium tiller extensions, fitted with X-gripped heat
shrinkable tubing and a releasable rubber joint with rope core.
Give your Optimist some color with the colored X-gripped tiller extensions. A range of 20 mm aluminium tiller extensions, fitted with X-gripped heat shrinkable tubing and a releasable rubber joint with rope core.
Give your Optimist some color with the colored X-gripped tiller extensions.
A range of 20 mm aluminium tiller extensions, fitted with X-gripped heat
shrinkable tubing and a releasable rubber joint with rope core.
The traditional blow molded handbailer which fits perfectly to the corners
of the IOD’95 hull. Contents: 3.5liter. Red and green for port and starboard.
Length 21cm, width12 cm.
The traditional blow molded handbailer which fits perfectly to the corners
of the IOD’95 hull. Contents: 3.5liter. Red and green for port and starboard.
Length 21cm, width 12cm.
Large, lightweight and durable handbailers. The wide ergonomic base
creates more bailing capacity with each stroke, the curved bottom to follow
the bailing motion and a triangular top so you don’t get stuck behind the
gunwale. High handle with end stop to prevent slipping out of your hand, with
integrated shockcord fastening. Reinforced wear areas, rounded front lip and
stackable for transportation.
Length 24cm, width 17cm.
Large, lightweight and durable handbailers. The wide ergonomic base
creates more bailing capacity with each stroke, the curved bottom to follow
the bailing motion and a triangular top so you don’t get stuck behind the
gunwale. High handle with end stop to prevent slipping out of your hand, with
integrated shockcord fastening. Reinforced wear areas, rounded front lip and
stackable for transportation.
Length 24cm, width 17cm.
Foam tubing covered by heavy duty polyester cloth. This fender has a snug
fit around the bow of the Optimist. Ideal for sailing schools. With grommet in
the middle to pass the painter.
Durable UV resistant and breathable bottom cover made of Moistureguard
2000. Quick and easy to install with a 6 mm shockcord in the skirt and 2 adjustable
straps. The cover has 3 wide strips of thick foam padding to protect
the hull. Perfect for outside storage.
Durable cover made of Moistureguard 2000, a heavy duty 900D polyester
with a polyurethane membrane which has excellent breathability and is
waterresistant. Wide skirts around the edge of the hull for good protection.
Fast and easy to install with two adjustable straps.
Buoyancy bag 43 Liter, grey. Optiparts heavy duty buoyancy bags, according to IOD’95 rules. These bags are made of polyurethane coated nylon and are about half the weight and significantly stronger than bags made of PVC or PVC coated nylon.43 liter sizes: 27 x 88 cm inflated, 41 x 100 cm deflated.
Made of high quality flexible PVC cloth. Suitable for all non IOD’95 Optimists
and other classes. Can be used inside GRP tanks or with straps. Size inflated 24 cm x 92 cm.
Buoyancy bag 48 Liter, blue. Optiparts heavy duty buoyancy bags, according to IOD’95 rules. These bags are made of polyurethane coated nylon and are about half the weight and significantly stronger than bags made of PVC or PVC coated nylon. These bags are available with a twist lock tube valve. This valve is attached to a piece of tubing. With this valve the bag can easily and quickly be inflated and deflated. 48 liter sizes: 29x92 cm inflated, 44x98 cm deflate.
Buoyancy bag 48 Liter, double coloured grey and blueOptiparts heavy duty buoyancy bags, according to IOD’95 rules. These bags
are made of polyurethane coated nylon and are about half the weight and
significantly stronger than bags made of PVC or PVC coated nylon. These bags are available with a twist lock tube valve. This valve is attached
to a piece of tubing. With this valve the bag can easily and quickly be inflated
and deflated.48 liter sizes: 29x92 cm inflated, 44x98 cm deflated
Buoyancy bag 48 Liter, orange. Optiparts heavy duty buoyancy bags, according to IOD’95 rules. These bags are made of polyurethane coated nylon and are about half the weight and significantly stronger than bags made of PVC or PVC coated nylon. These bags are available with a twist lock tube valve. This valve is attached to a piece of tubing. With this valve the bag can easily and quickly be inflated and deflated. 48 liter sizes: 29x92 cm inflated, 44x98 cm deflate.
Buoyancy bag 48 Liter, red. Optiparts heavy duty buoyancy bags, according to IOD’95 rules. These bags are made of polyurethane coated nylon and are about half the weight and significantly stronger than bags made of PVC or PVC coated nylon. These bags are available with a twist lock tube valve. This valve is attached to a piece of tubing. With this valve the bag can easily and quickly be inflated and deflated. 48 liter sizes: 29x92 cm inflated, 44x98 cm deflate.
Buoyancy bag 48 Liter, yellow.Optiparts heavy duty buoyancy bags, according to IOD’95 rules. These bags are made of polyurethane coated nylon and are about half the weight and significantly stronger than bags made of PVC or PVC coated nylon. These bags are available with a twist lock tube valve. This valve is attached to a piece of tubing. With this valve the bag can easily and quickly be inflated and deflated. 48 liter sizes: 29x92 cm inflated, 44x98 cm deflate.
Affordable black plastic clinometer with self-adhesive backing for easy
fitting. An accurate ball gauge shows the boat angle up to 45 degrees.
Size: 90x40mm.
A 6 mm shockcord with a red PVC handle to retain the daggerboard in its
case. The handle keeps your daggerboard in place and your hiking straps
up too. Comes in a complete set to keep the shockcord in place.
Non-tangling double braided mainsheets with a light high stretch
multi-filament polypropylene core and a braided polyester cover which
leaves the outer to be the load bearer.Diameter: 7mmLength: 13,5mColor: red
This bottom cover provides protection during traveling. Made of pigment
dyed 420D polyester with PU backing, high quality 190T innerlining and
closed cell foam in between (only for traveling). Not UV resistant and not
breathable.
Top cover made of strong and flexible solution dyed PVC coated
polyester. 100% waterresistant but not breathable. Wide skirts around the
edge of the hull for good protection. Fast and easy to install with two adjustable
straps. Solution dyed polyester has much better color fastness and UV
resistance than cheaper pigment dyed polyester.
Plain bearing halyard as used on Optiparts silver masts.Set contains:- Plain bearing hook-in block- 16 mm Harken ball bearing micro block- top part of the halyard
Harken ball bearing hook-in block.Used on Blackgold racing masts. Due to the curved saddle the block rests
against the mast in a fixed position which prevents mast wear and creates
a halyard system with less friction.
UV and water-resistant, padded bottom cover. Colour grey.Material, Airtex®
(PES, with one side acryl coated).We developed this very durable optimist bottom cover for transport and storage. Due to the material UV resistant properties it lasts long.
UV and water-resistant, padded bottom cover. Colour grey.
Material, Airtex® (PES, with one side acryl coated).
We developed this very durable optimist bottom cover for transport and storage. Due to the material UV resistant properties it lasts long. The cover is out of one shape.
Joint with rope core, releasable base for 16mm extensions.The rope core will avoid complete failure should the rubber tear. Mounted
with pin which is kept in place by a piece of heat shrinkable tubing.
The distance between the mounting hole centers of all joints is 32mm.
Set of two load straps with protection behind the buckle. Cam-action
buckle and high quality 25 mm wide PP webbing. The 5 meter strap is
ideal for securing Optimists and other dinghies. Comes in pair.
The lightweight alternative to a block, with no moving parts this is an
extremely low maintainance item. Hard anodized with PTFE coating to
provide the smoothest wear resistant surface possible.These low friction
rings can be used in various applications: O3001 as lead ring for
control lines, OW3002 as Optimist halyard block and OW3003 as Optimist
mainsheet block.
Stainless steel lock to secure your mast from coming out of its step when
the boat is capsized. Prevents costly foredeck damage. This lock has
a rubber insert and should be clamped around the mast just under the deck.We suggest to use the collar in addition to the rope locking system to create
double security. Supplied with a line to attach it to the maststep.
The designed trolley combines premium durability, light materials, innovative design and assembly easiness.
Ready to go in 3 simple steps. Extreme light construction that weights only 4 kilograms with slip rollers for easier
launching and pulling dinghy out of the water. Double fine designed locking system allows you to store dingy in two
positions - normal position for transport and upside down position to clean and dry your equipment.
This spar set is the stiffest one produced by Optimast. It’s dedicated to
heavier sailors (+40kg), who have very good skills in navigating the boat in strong winds.
The material used to make the Black Optimast set is modified by Optimast aluminium
G.R.T. alloy.The set contains:- Ultimate racing mast #2,2mm - Ultimate racing boom ø45mm #1,2mm - Ultimate racing sprit ø28mm #1,2mmAlso inclusive rigging pack:
- halyard with friction ring
- halyard line - Optimast claw block
- regatta lacing lines
- Optimast wind indicator
- wind indicator top pins
- optimast handle
- mast slip band.
This spar set is for sailors above 30kg. Red Flex is an important link between all of our sailing sets. We noticed that
most of the coaches select sets of sprits with a larger arrow of deflection
and lower weight. On the basis of experience, a set of Red Flex fills the gap
between Blue and Red spar set. Red Flex spar set is especially good when
sailing on the open waters with more waves. This set is very dynamic.The set contains:
- Ultimate racing mast # 1,8mm
- Ultimate racing boom ø 40mm # 1,5mm
- Ultimate racing sprit ø 26mm # 1,2mmAlso inclusive rigging pack:
- halyard with friction ring
- halyard line
- Optimast claw block
- regatta lacing lines
- Optimast wind indicator- wind indicator top pins
- optimast handle
- mast slip band.
This spar set is for sailors above 35kg.
This spar set was derived from experiments and tests. It is more resilient than
the material used in Black Optimast, with wall thickness of 2.0 mm, which gave
this set more dynamic character, forgiving passive conducting of the boat and
enabling sail opening in case of strong wind gusts.
The set contains:- Ultimate racing mast #2,0mm
- Ultimate racing boom ø45mm #1,2mm
- Ultimate racing sprit ø28mm #1,2mm Also inclusive rigging pack:
- halyard with friction ring
- halyard line
- Optimast claw block
- regatta lacing lines
- Optimast wind indicator
- wind indicator top pins
- optimast handle
- mast slip band.
This Optimax spar set is for leightweight sailors under 35kg.Complete set of optimist rig with following items:
- Optimax MK3 Flex mast- Optimax MK3 boom - 40mm
- Optimax MK3 Flex sprit (if no choice)For the same price the sprit choice is yours, just write it in the order comment: MK3/MK3Flex/MK3Hyperflex Also inclusive rigging pack with:
- 2x Nylon top pins
- 1x Harken ball bearing hook-in block
- 1x Windesign wind indicator PRO - 1x Windesign 25 mm low friction ring- 1x Nylon sprit adjuster handle
- 1x 3 mm Dyneema halyard line
- 1x 4 mm halyard line
- 5x 2.2 mm tack lines
- 12x 1.2 mm double lacing lines
- 1x Deck collar with mast sleeve.
The most flexible racing sprit creates less distortion
of the sail shape and provides an active change of
tension on the leech. For the more experienced sailor
who can adjust their mainsheet tension constantly.Diam. 28mm
This spar set is for midweight sailors 35-45kg.
Complete set of optimist rig with following items:
- Optimax MK3 mast
- Optimax MK3 boom - 40mm
- Optimax MK3 sprit (if no choice)For the same price the sprit choice is yours, just write it in the order comment: MK3/MK3Flex/MK3HyperflexAlso inclusive rigging pack with:
- 2x Nylon top pins
- 1x Harken ball bearing hook-in block- 1x Windesign wind indicator PRO
- 1x Windesign 25 mm low friction ring
- 1x Nylon sprit adjuster handle
- 1x 3 mm Dyneema halyard line
- 1x 4 mm halyard line
- 5x 2.2 mm tack lines
- 12x 1.2 mm double lacing lines
- 1x Deck collar with mast sleeve.
This Optimax spar set is for midweight sailors 35-45kg.
Complete set of optimist rig with following items:
- Optimax MK3 mast
- Optimax MK4 boom - 45mm
- Optimax MK3 sprit (if no choice)For the same price the sprit choice is yours, just write it in the order comment: MK3/MK3Flex/MK3Hyperflex Also inclusive rigging pack with:
- 2x Nylon top pins
- 1x Harken ball bearing hook-in block
- 1x Windesign wind indicator PRO
- 1x Windesign 25 mm low friction ring
- 1x Nylon sprit adjuster handle
- 1x 3 mm Dyneema halyard line
- 1x 4 mm halyard line
- 5x 2.2 mm tack lines
- 12x 1.2 mm double lacing lines
- 1x Deck collar with mast sleeve.
This Optimax spar set is for heavyweight sailors above 45kg.Complete set of optimist rig with following items:
- Optimax MK4 mast
- Optimax MK4 boom - 45mm
- Optimax MK3 sprit (if no choice)For the same price the sprit choice is yours, just write it in the order comment: MK3/MK3Flex/MK3Hyperflex Also inclusive rigging pack with:
- 2x Nylon top pins
- 1x Harken ball bearing hook-in block
- 1x Windesign wind indicator PRO
- 1x Windesign 25 mm low friction ring
- 1x Nylon sprit adjuster handle
- 1x 3 mm Dyneema halyard line
- 1x 4 mm halyard line
- 5x 2.2 mm tack lines
- 12x 1.2 mm double lacing lines
- 1x Deck collar with mast sleeve.
7 meter Optimist tapered mainsheet, made of abrasion resistant PES
material. Tapered from 9 to 6.5 mm. Thick and soft where it touches your
hand. Thin and smooth elsewhere for less friction. Tapered on both ends.
Long enough to create a 4:1 mainsheet with 2 boom blocks.
This spar set is for midweight sailors 35-45kg.
Complete set of optimist rig with following items:- BLackGold Medium mast- BlackGold Medium boom - 40mm- BlackGold Medium sprit - 27mmAlso inclusive rigging pack:- halyard system with Dyneema® halyard line - harken
hook-in block - Windesign low friction ring, - PRO wind indicator- top pins - sprit
halyard handle - mast sleeve.BlackGold mast informations:
The Blackgold collection contains three types of spars. The regular BLACKGOLD Power mast which is suitable for sailors above 45 kg, the 12% more flexible BLACKGOLD Medium mast and the most flexible BLACKGOLD Lite mast which is 20% more flexible compared to the BLACKGOLD Power. All three are 45 microns black hard anodized 7075 masts and come with high grade nylon fittings and hard anodized cleats.
This spar set is for sailors above 45kg.
The set contains: - BlackGold Power mast- BlacGold Power boom (45mm)- Blackgold Medium Sprit (27mm)
Also inclusive rigging pack: - halyard system with Dyneema® halyard line - harken hook-in block - Windesign low friction ring, - PRO wind indicator - top pins - sprit halyard handle - mast sleeve.
BlackGold mast informations:The Blackgold collection contains three types of spars. The regular
BLACKGOLD Power mast which is suitable for sailors above 45 kg, the 12%
more flexible BLACKGOLD Medium mast and the most flexible BLACKGOLD
Lite mast which is 20% more flexible compared to the BLACKGOLD Power.
All three are 45 microns black hard anodized 7075 masts and come with
high grade nylon fittings and hard anodized cleats.
Lightweight aluminium trolley with stainless steel axles and solid hull supports.
Supplied with Bow wow which is made of recycled environmental
friendly plastic, a unique system to lock the bow to the trolley with one quick
and simple movement. Prevents the hull from sliding off on steep launch
ramps. The trolley has been designed to be the most functional available.
Spring locking quick release of all parts allow the trolley to be disassembled
in a matter of seconds for storage and travel. The frame has welded joints
and is anodized to prevent corrosion. The Optiparts trolley is supplied with
8 mm stainless steel push button wheel locks which are mounted inside the
axle.
Maffioli Optiswift
regatta
Mainsheet,
7 mm / 7 m
with ballÚjfajta sott kötél, ami a megszokott standard 8mm helyett, csak 7mm vastag! Kisebb átmérőnek köszönhetően jobban lehet rajta érezni a vitorlában ébredő erőt.Hossza: 7m(Viszonyításképp a vékonyított sottok 6,5-9mm átmérőjűek.)
This padded strap is made of strong
polyester webbing, covered with wear resistant cloth, filled with foam plate
material which does not absorb water. Strong stitched through construction.
Aft end a pressed ring and sewn flat to prevent twisting.Also: - loops for shockcord to pull up the front for easy access
- and front ends are open for mounting with plate or rope.
The combination of Black Technora, Dyneema, Polyester and Cordura
creates the most advanced Optimist mainsheet available. The mainsheet has
extremely good wear resistance characteristics. It has a total length of 7.6
meter and is double tapered from 9 to 6.5 mm.
Get a better grip and feel with your boat, with this extra stiff pro padded
hiking straps. Same style as the padded hiking strap but with non slip layer
underneath and hard foam inside. Both padded straps are made of strong
polyester webbing, covered with wear resistant cloth, filled with foam plate
material which does not absorb water. Strong stitched through construction.Aft end a pressed ring and sewn flat to prevent twisting.
Also:- loops for shockcord to pull up the front for easy access
- and front ends are open for mounting with plate or rope.
A complete protection package for the Optimist. Contains self adhesive
PTFE protection for maststep, outhaul, daggerboard, sprit, rudder, bailer and
boat corners. Also contains 5 PTFE mast disks and rubber daggerboard slot
inserts.
Heavy duty bag from 600D PVC coated polyester with two compartments for
sail, mast, boom and sprit. With zip closure, name tag pocket and detachable
and adjustable carrying strap. Can be bundled with 2 straps to create a
compact package. Built to fit a thin-walled PVC irrigation pipe, to prevent the
sail from being crushed.
€47.60*
This website uses cookies to ensure the best experience possible. More information...