The traditional blow molded handbailer which fits perfectly to the corners
of the IOD’95 hull. Contents: 3.5liter. Red and green for port and starboard.
Length 21cm, width12 cm.
The traditional blow molded handbailer which fits perfectly to the corners
of the IOD’95 hull. Contents: 3.5liter. Red and green for port and starboard.
Length 21cm, width 12cm.
Large, lightweight and durable handbailers. The wide ergonomic base
creates more bailing capacity with each stroke, the curved bottom to follow
the bailing motion and a triangular top so you don’t get stuck behind the
gunwale. High handle with end stop to prevent slipping out of your hand, with
integrated shockcord fastening. Reinforced wear areas, rounded front lip and
stackable for transportation.
Length 24cm, width 17cm.
Large, lightweight and durable handbailers. The wide ergonomic base
creates more bailing capacity with each stroke, the curved bottom to follow
the bailing motion and a triangular top so you don’t get stuck behind the
gunwale. High handle with end stop to prevent slipping out of your hand, with
integrated shockcord fastening. Reinforced wear areas, rounded front lip and
stackable for transportation.
Length 24cm, width 17cm.
Foam tubing covered by heavy duty polyester cloth. This fender has a snug
fit around the bow of the Optimist. Ideal for sailing schools. With grommet in
the middle to pass the painter.
Buoyancy bag 43 Liter, grey. Optiparts heavy duty buoyancy bags, according to IOD’95 rules. These bags are made of polyurethane coated nylon and are about half the weight and significantly stronger than bags made of PVC or PVC coated nylon.43 liter sizes: 27 x 88 cm inflated, 41 x 100 cm deflated.
Made of high quality flexible PVC cloth. Suitable for all non IOD’95 Optimists
and other classes. Can be used inside GRP tanks or with straps. Size inflated 24 cm x 92 cm.
Buoyancy bag 48 Liter, blue. Optiparts heavy duty buoyancy bags, according to IOD’95 rules. These bags are made of polyurethane coated nylon and are about half the weight and significantly stronger than bags made of PVC or PVC coated nylon. These bags are available with a twist lock tube valve. This valve is attached to a piece of tubing. With this valve the bag can easily and quickly be inflated and deflated. 48 liter sizes: 29x92 cm inflated, 44x98 cm deflate.
Buoyancy bag 48 Liter, double coloured grey and blueOptiparts heavy duty buoyancy bags, according to IOD’95 rules. These bags
are made of polyurethane coated nylon and are about half the weight and
significantly stronger than bags made of PVC or PVC coated nylon. These bags are available with a twist lock tube valve. This valve is attached
to a piece of tubing. With this valve the bag can easily and quickly be inflated
and deflated.48 liter sizes: 29x92 cm inflated, 44x98 cm deflated
Buoyancy bag 48 Liter, orange. Optiparts heavy duty buoyancy bags, according to IOD’95 rules. These bags are made of polyurethane coated nylon and are about half the weight and significantly stronger than bags made of PVC or PVC coated nylon. These bags are available with a twist lock tube valve. This valve is attached to a piece of tubing. With this valve the bag can easily and quickly be inflated and deflated. 48 liter sizes: 29x92 cm inflated, 44x98 cm deflate.
Buoyancy bag 48 Liter, red. Optiparts heavy duty buoyancy bags, according to IOD’95 rules. These bags are made of polyurethane coated nylon and are about half the weight and significantly stronger than bags made of PVC or PVC coated nylon. These bags are available with a twist lock tube valve. This valve is attached to a piece of tubing. With this valve the bag can easily and quickly be inflated and deflated. 48 liter sizes: 29x92 cm inflated, 44x98 cm deflate.
Buoyancy bag 48 Liter, yellow.Optiparts heavy duty buoyancy bags, according to IOD’95 rules. These bags are made of polyurethane coated nylon and are about half the weight and significantly stronger than bags made of PVC or PVC coated nylon. These bags are available with a twist lock tube valve. This valve is attached to a piece of tubing. With this valve the bag can easily and quickly be inflated and deflated. 48 liter sizes: 29x92 cm inflated, 44x98 cm deflate.
Affordable black plastic clinometer with self-adhesive backing for easy
fitting. An accurate ball gauge shows the boat angle up to 45 degrees.
Size: 90x40mm.
A 6 mm shockcord with a red PVC handle to retain the daggerboard in its
case. The handle keeps your daggerboard in place and your hiking straps
up too. Comes in a complete set to keep the shockcord in place.
Set of two load straps with protection behind the buckle. Cam-action
buckle and high quality 25 mm wide PP webbing. The 5 meter strap is
ideal for securing Optimists and other dinghies. Comes in pair.
Stainless steel lock to secure your mast from coming out of its step when
the boat is capsized. Prevents costly foredeck damage. This lock has
a rubber insert and should be clamped around the mast just under the deck.We suggest to use the collar in addition to the rope locking system to create
double security. Supplied with a line to attach it to the maststep.
This padded strap is made of strong
polyester webbing, covered with wear resistant cloth, filled with foam plate
material which does not absorb water. Strong stitched through construction.
Aft end a pressed ring and sewn flat to prevent twisting.Also: - loops for shockcord to pull up the front for easy access
- and front ends are open for mounting with plate or rope.
Get a better grip and feel with your boat, with this extra stiff pro padded
hiking straps. Same style as the padded hiking strap but with non slip layer
underneath and hard foam inside. Both padded straps are made of strong
polyester webbing, covered with wear resistant cloth, filled with foam plate
material which does not absorb water. Strong stitched through construction.Aft end a pressed ring and sewn flat to prevent twisting.
Also:- loops for shockcord to pull up the front for easy access
- and front ends are open for mounting with plate or rope.
The Optiparts maststep has an oval cup, which allows the mast to tilt forward
when going downwind. Friction between mast and maststep is reduced
to a minimum. Different mast rakes can easily be repeated using the scale
on the base. Separately a mast step spring lock can be purchased aswell.
The stainless steel spring prevents the nut from turning accidentally.
UV-resistant duct tape. Great tool to cover the corners of your boat, or just simply use it on a dry surface if something is broken. Due to it being UV resistant the fiber-reinforced part is not going to divide from the glued part.
€9.55*
This website uses cookies to ensure the best experience possible. More information...
